How to get the best out of your blank skateboard deck

You’ve probably seen the image above: a blank, unadorned skateboard.

Or, in this case, a deck that has been designed by the late, great and great-grandson of a skateboard legend.

It’s called the Bart Simpson Skateboard Deck, and it’s available for purchase from the Australian skateboard company, BartSimpson.

The idea is that you can design your own deck to suit your personal taste, and use the template to create a skateboarding deck of your own.

You might not be able to build a skate board with Bart Simpson, but you can still use the BartSimpsons skateboard template.

You could go for a traditional skateboard design with a single piece of wood or PVC, and make it up as you go along, but the Bart Simpsons template comes in two flavours.

The first one is a traditional deck, with a simple wooden piece that sits on top of a polystyrene frame.

The other is a design with two layers of foam sandwiched between two plastic pieces.

This design has a single deck of foam, but instead of the wood, it has a polycarbonate shell.

This is a skateboards deck, designed by BartSimps skateboarding legend, Bart Simpson.

The BartSims template comes with the same three sections of foam that are on the original Bart Simpson deck, but also comes with three layers of polycarbonates.

You can use this as a base for your own board, or as a template for other decks you might be working on.

The foam can be used to create any shape you like.

You could have a standard board with a standard skateboard logo on it, or you could add your own logo to the foam.

You’re free to add as many logos as you like, but I found that the Bartpsons template is perfect for branding your own skateboards designs.

I created my own Bart Simpson template by sketching on a scrap piece of scrap wood, and then drawing out a sketch of a board in my head.

I then drew out the shape on the scrap piece and printed it out on the foam board.

BartSimmpson recommends using a piece of cardboard or styrene that is flat on top, so the foam will lay flat on the surface of the board.

This is how the Bart Simpsons template looks like.

It is, as you might expect, a fairly straight-forward template, but it does come with some handy tips to make your board look more like your own personal style.

I like to use the left and right side of the foam to create the shape.

The top foam layer is the left, and the bottom is the right.

I use this to lay down the foam, so it’s not super-sloping.

I then use the bottom foam to lay the boards top and bottom edge, creating the bottom edge of the shape that I want.

The middle layer of foam is used to add support to the boards edges.

I put a strip of PVC around the foam and then cut the strip to the right length, to create an opening between the foam layers.

The final layer of plastic is then used to cover the edges of the boards shape.

It’s a nice little piece of plastic that holds the foam up in place, and allows the foam on the bottom to sit in place on the board, creating a solid edge.

It really works as a skate, and I would recommend it for a variety of decks, from basic skateboards to more sophisticated decks.

The Bart Simpson skateboard templates come with a number of options to build your own, and BartSimss skateboarders are always happy to answer any questions.